Worx WG119 Manual De Usuario página 13

the lower section of spool.
Care should be taken to ensure that the line
is neatly coiled on the spool. (See Fig. S)
Failure to do so will impair the efficiency of the
automatic line feed.
Then fit the spool as described above in
"Changing the line Spool".
mAINTENANCE
After use, disconnect the machine from the
mains and check for damage. Your power
tool requires no additional lubrication or
maintenance. There are no user serviceable
parts in your power tool. Mains powered
trimmers should only be repaired by an
authorised repairer use only manufacturers
recommended replacement parts and
accessories.
Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry
cloth. Always store your power tool in a dry
place out of the reach of children. Keep the
motor ventilation slots clean. Keep all working
controls free of dust. If you see some sparks
13
flashing in the ventilation slots, this is normal
and will not damage your power tool.
2 in 1 Grass Trimmer/Edger EN