Wiring Overview; Wiring For Power - Hach LANGE astroTOC UV/Turbo Analyzer Manual Del Usuario

Wiring overview

Figure 5 8001 I/O board connections
1 Analog output connectors and links
2 Location for optional communications card and JP1
3 Level detector connectors (REA1-REA3), level
detector links (LK10-LK13) and input relay
connector (SW1)
1
Use only when the optional communication card is installed.

Wiring for power

Fire hazard. Install a 15 A circuit breaker in the power line. A circuit breaker can be the local power
disconnect, if located in close proximity to the equipment.
12 English
4 Blowback valve connector
5 Output relay connectors
6 Communications card connectors
D A N G E R
1