Configuring The Monitor; Keys Used For The Illustrations In The Following Chapters; Selector No; Switch No. 9 (C9) - SOMFY VSYSTEMPRO Manual De Instalación

8

5.1 Keys used for the illustrations in the following chapters

Communication between the external module and the monitors corresponding to the call button
Call and "audio" communication between the monitors of two houses within a single installation
(different main addresses)
Call and "audio" communication between the monitors of the same house (same main address)
Master monitor on which the video is displayed during a call from an external module.
Note: All monitors in the a single house ring when a call is received.
Note: two monitors can display the video during a call if the installation is equipped with a power
supply ref. 9020028
Slave monitor which can display the video instead of the master monitor when communicating with the
external module.

5.2 Selector no. 8

ON: last monitor on the BUS line
OFF: other monitors are connected on the BUS line a er this.
S8
ON ON
1 1
S8
ON ON
1 1

5.3 Switch no. 9 (C9)

This switch is used to define the main address (Adr.) of the monitor on the BUS line:
When the installation includes a single house (external module with one call button), the main address must be set
to 1 for all the monitors in the house.
S8
ON ON
1 1
Copyright © 2016 Somfy SAS. All rights reserved.
5 CONFIGURING THE MONITOR
ON
C9 C10
ON
2 3 4 5 6 7 8 1 2 3 4
Adr . 1 Ext . 1
S8
C9 C10
ON ON ON
2 3 4 5 6 7 8 1 2 3 4 1
Adr . 1 Ext . 1
C9
C10 S8
ON ON ON
2 3 4 5 6 7 8 1 2 3 4 1
Ext. 1
Adr. 1
ON
1 2 3 4 5 6
9
S8
C9 C10
ON ON
1 2 3 4 5 6 7 8 1 2 3 4 1
Adr . 1 Ext . 2
C9
C10 S8
ON ON
1 2 3 4 5 6 7 8 1 2 3 4 1
Ext. 2
Adr. 1
ON
7 8 1 2 3 4
10
S8
C9 C10
ON ON ON
1 2 3 4 5 6 7 8 1 2 3 4 1
Adr . 1 Ext . 3
C9
C10 S8
ON ON ON
1 2 3 4 5 6 7 8 1 2 3 4 1
Ext. 3
Adr. 1
EN
C9 C10
ON ON
1 2 3 4 5 6 7 8 1 2 3 4
Adr . 1 Ext . 4
C9
C10
ON ON
1 2 3 4 5 6 7 8 1 2 3 4
Ext. 4
Adr. 1
7