Settings; Guide; Technical Data - SOMFY VSYSTEMPRO Manual De Instalación

11 Brightness setting thumb-wheel
16 Contrast setting potentiometer
17 Colour setting potentiometer
12 Buzzer level selector
Conversation
13
thumb-wheel
Note: do not alter the setting of the potentiometer to the le of potentiometer 16 (factory setting).
Once the installation process is finished:
[1]. Complete the guide at the start of the user manual.
[2]. Give the user manual to the main user in each house.
[3]. Explain the functions available on the installation to each main user.
Power supply
Screen
Nominal current
Operating temperature
Frequency range and max power used for the RTS control
Copyright © 2016 Somfy SAS. All rights reserved.

8 SETTINGS

Front panel
Perform a communication test with the external module. Turn thumb-
wheel 11 and potentiometers 16 and 17 until the image is displayed
correctly.
Perform a buzzer test, adjust the 3-position selector to the position that
suits the users.
volume setting Perform a communication test with the external module. Turn the
thumb-wheel until the voice of the person speaking can be heard clearly.

9 GUIDE

10 TECHNICAL DATA

Back of the front panel
17
11 16
12
13
Bus line
7'' - 800 x 480 mm
0.8 A
-10/+50°C
433.050 MHz - 434.790 MHz
e.r.p. <10 mW
EN
13