Nameplate; Signs And Symbols Used En - Abicor Binzel MF1-Rear Instructivo De Servicio

MF1 rear

3.3 Nameplate

MF1 rear is labelled as follows:
The
1
2
1 Device number
Fig. 1
Marking
When making enquiries, please note the following information:
• Type of device
• Device number (1)
Standard reduction ratio
Laser applications
Tab. 5
3.4 Signs and symbols used
The following signs and symbols are used in the operating instructions:
Symbol Description
•

1
2 Reduction ratio
i= 30:1
Marking
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
Step(s) described in the text to be carried out in succession
3 Product description
EN - 7