3.
Drill the four pilot holes using a 3/16 in. (5 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 2 ½ in. (63 mm).
25
4.
Install the four washers
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
movement of the wall plate
Go to PAGE 14.
3
26
and lag bolts
. Tighten all four lag bolts
23
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
2½ in.
(63 mm)
3/16 in.
(5 mm)
26
25
only until the washers
26
MUST BE firmly tightened to prevent unwanted
4
25
26
23
are pulled firmly against the wall plate
23
.
11