Astralpool System VRAC III Basic Manual Instalación página 11

4. Connect the 3-wires power cable (connected on J4 port at the valve).
- Green/Yellow wire to ground pin. Ground pin colour: Green/Yellow.
- Blue wire to neutral pin N on the protection.
- Brown wire to pin 4T2 on the pump protector.
It´s obliged to respect the polarity (previous 2008 valves).
5. Find the connection between pin 6 – 8 on the digital timer and remove it.
15/12/2010
Fig. 13.- Power cable connections.
Fig. 14.- Connection from factory on the digital timer.
Página 11 de 19
Installation Manual
BASIC Automatic
Multiport Valve
Rev 3.0