Publicidad
Idiomas disponibles
Idiomas disponibles
4. Connect the 3-wires power cable (connected on J4 port at the valve).
-
Green/Yellow wire to ground pin (1st on the left). Ground pin colour:
Green/Yellow.
-
Blue wire to neutral pin (2nd on the left). Neutral pin colour: Blue.
-
Brown wire to pin 2T1 on the pump protector.
It´s obliged to respect the polarity (previous 2008 valves).
Power cable
15/12/2010
Fig. 7.- Power cable connections to the electric box.
Página 6 de 19
Installation Manual
BASIC Automatic
Multiport Valve
Rev 3.0
Publicidad
