Powered Hand Tool - Hoover SteamVac FH50015 Manual Del Proprietário

1-10
converter firmly to snap in place. Press solution tube (G) into clip next to converter as shown.
Wrap hose around hook on upper
hose holder (K).
How to reattach tool cover
The tool cover is designed with a break-away feature which allows it to snap free if it is
pushed open too far.
1-12
K
release clean solution.
3. Cord clip: place cord in clip
to keep it out of the way
Upfront tool storage
1-15

Powered hand tool

The powered hand tool is shipped in a plas-
tic bag for protection. Remove the bag
before using the tool by first opening tool
door.
F
H
handle (J). Press hose into clips on upper
1-13
J
K
Wrap hose around lower tool holder and
continue until nozzle connector is near
upper hose holder. Clip hose in place.
1-16
To remove tool (A), pull it down and out-
ward.
To reposition the tool, reverse this proce-
dure.
E
G
1-11
I
H
To reattach, align hinges of cover with slots
on sides of tool storage area.
Push cover down to secure in place.
1. Hand grip
2. Solution trigger: press to
1-14
driver.
Only two nuts are needed on this model.
1-17
when using cleaner
4. Hose
5. Hose holder: wrap hose
around holder and hooks
storage.
6. Hose hooks
7. Cord hooks: wrap cord
around hooks for storage.
top hook can be rotated
or left for quick and
Continued ➔
G
for
The
right
easy
5