System Overview - Tiiwee X1 Home Alarm Starter Kit Manual Del Usuario

control can be paired to several Alarm units if required.
Intended use
The Tiiwee Home Alarm System is primarily designed to deter burglars when
they enter your home. The heart of the system is the X1-siren. Place the
siren in your home where burglars are most likely to enter. If you have a
larger home, please consider placing addi onal Tiiwee X1 or A3 (outdoors-)
sirens.
The system is ready for use. Your system is pre-configured, and the sensors
and remote controls are connected to the X1-siren. Window sensors are
connected to zone 1. If a PIR mo on sensor is included, it is connected to
zone 2. We advise reading this user manual carefully and to familiarize
yourself with its opera ng principle and ways to fine-tune it to your exact
needs.

2. System overview

SET-bu on
On/Off-bu on
Remote Control
Ac va on-bu on:
ac vates the alarm
unit
Emergency-bu on:
triggers a loud alarm
sound. Press the
Deac va on-bu on
to stop
Siren
Zone indica on
Deac va on-bu on:
Deac vates the alarm
unit
Loudspeaker-bu on:
Changes the
no fica on sound
from the siren
3. Installing Your Tiiwee alarm system in four simple steps
1. Unpack:Unpack all kit components and lay them in front of you on the
table.
2. Remove ba ery protec on:
X1-siren: Slide the back panel from the X1-siren and remove the ba ery
protec on strip. You hear one beep, and the X1-siren switches on
automa cally.