How To Use The Indoor Unit; Additional Options; Airflow Direction Control - Electrolux EXM18HV1W Manual De Instrucciones

How to Use the Indoor Unit
Additional Options
1 Smart Restart Function
The air conditioner resumes automatically with
the previous settings after a possible power
failure.
2 Self Diagnose and Auto Protection
This air conditioner can detect the malfunctions,
showing the diagnosis on the display of the
indoor unit by means of an error code.
The air conditioner will change operation
automatically for self-protection.
Airflow Direction Control
• Adjust the airflow direction properly, otherwise,
it might cause discomfort or uneven room
temperatures.
• Adjust the horizontal louvers with the remote
control.
• Adjust the vertical louvers manually.
To set the vertical (up/down) airflow direction
automatically
• Perform this function while the unit is in
operation.
• Press the Swing button on the remote control,
the horizontal louver will swing up and down
automatically.
• When the louver moves to the desired direction,
press the Swing button again and the louver will
stay at where it is.
• Press the Swing button again and the louver will
start swing up and down automatically.
Range
Up and down airflow
To adjust the horizontal (left/right) airflow
direction manually
• Adjust the vertical louvers manually by means of
the Left/Right lever of the vertical louver arm.
• Perform these adjustments before you start the
unit because once it has been started, there is a
risk of your fingers getting caught on the fan.
Vertical
louver
Left/ and right airflow
caution
• The Swing button will be disabled when the
air conditioner is not in operation (even if the
Timer On is set).
• Do not operate the air conditioner for long
time with the airflow direction set downward
in COOL or DEHUMIDIFY mode. Otherwise,
condensate may occur on the surface of the
horizontal louver and drop onto the floor or
furnishings.
Range
15