Troubleshooting - Electrolux EXM18HV1W Manual De Instrucciones

Trouble Shooting
The air conditioner is not user serviceable. Incorrect repair may cause electric shock or fire.
Please contact an authorised service center for professional repair.
warning
If one of the following situations occur, immediately stop the air conditioner,
disconnect the power, and contact the authorised service center.
• If error code (except H1) appears on the
display of indoor unit.
• Power indicator or other indicator flash rapidly
and this flashing can not be stopped by
disconnecting the power and then connecting
it again.
• Fuse blows frequently or circuit breaker often
trips.
The pressure in the refrigeration system is low and could result in the unit breaking down.
Ask a certified installer to control it.
Malfunctions
The unit does not
start
The unit does not
cool or heat (if
applicable) the room
very well while air
flows out from the air
conditioner
If the trouble has not been corrected, please contact a local dealer or the nearest customer service
center. be sure to inform them of the detailed malfunctions and unit model.
20
Cause
Power cut
The unit may have become unplugged.
Fuse may have blown.
Voltage is too high or too low.
batteries in remote control may have
been exhausted.
The time you have set with timer is
incorrect.
Inappropriate temperature setting.
Air filter is blocked.
Doors or windows are open.
Air inlet or outlet of indoor or outdoor
unit has been blocked.
Compressor 3 minutes protection has
been activated.
• Water or other liquid is splashed into the unit.
• Water is leaking from the unit.
• There is a harsh sound during operation.
• Strong odours are emmited during operation.
• Power cord and power plug are overheating.
• Other abnormal situations.
Wait for power to be restored.
Check that plug is securely in wall
receptacle.
Replace the fuse.
Test the voltage by professionals.
Replace the batteries.
Wait or cancel timer setting.
Set the temperature correctly.
For details please refer to "Using
Remote Control" section
Clean the air filter.
Close the doors or windows.
Clear the obstructions away first,
then restart the unit.
Wait for 3 minutes.
What should be done