Indoor Unit Display; Remote Control - Electrolux EXM18HV1W Manual De Instrucciones

Indoor Unit Display
Indoor Unit Display
Heating Mode indicator
It lights when the heating function is activated
I Feel indicator
Cooling Mode indicator
It lights when I Feel function is activated.
It lights when the cooling function is activated
Turbo indicator
Power ON/OFF indicator
Illuminates during Turbo operation.
It lights when the appliance is running or at
standby mode Eco (Economy) indicator
Illuminates when ECO function is in operation.
Dehumidify indicator
It lights when the dehumidification function is
Temperature indicator
activated
Displays the temperature settings when the air
conditioner is in operation.
Temperature indicator
Displays the temperature setting when the Air
Timer indicator
Conditioner is in operation
The indicator illuminates when Timer is set ON
and/or OFF.
Signal receiver
Swing indicator
It lights when the Swing function is activated.
Remote Control
Remote Control
How to use the Remote Control
How to use the Remote Control
• Point the remote control to the signal receiver of
• Point the remote control to the signal receiver of
indoor unit.
indoor unit.
• Make sure there is no obstacle that may interfere
• Make sure there is no obstacle that may interfere
with the signal.
with the signal.
Location of the remote control
Location of the remote control
Mode Light
Fan Turbo
Timer-On Temp
Timer-Off Clock
Swing I feel Eco
• Keep the remote control where its signal
can reach the receiver of the indoor unit (a
maximum distance of 8m is allowed).
• When you select the timer operation, the
remote control automatically transmits a signal
to the indoor unit at the specified time.
• Keep the remote control where its signal can reach
• If you keep the remote control in a position that
• When you select the timer operation, the remote
• When the remote control sends out a signal, the
• If you keep the remote control in a position that
Signal
receiver
• When the remote control sends out a signal, the
Battery installation/replacement
Battery installation/replacement
• Slide the battery compartment cover off and
• Slide the battery compartment cover off and
• Slide the battery compartment cover back on
• Slide the battery compartment cover back on
the receiver of the indoor unit (a maximum distance
of 8m is allowed).
hinders proper signal transmission, a time lag of
control automatically transmits a signal to the
up to 15 minutes may occur.
indoor unit at the specified time.
symbol will blink for about 1 second on the
hinders proper signal transmission, a time lag of up
display. The indoor unit will acknowledge the
to 15 minutes may occur.
signal with a beep when it receives an effective
signal.
symbol will blink for about 1 second on the
display. The indoor unit will acknowledge the signal
with a beep when it receives an effective signal.
caution
caution
• The air conditioner will not operate if curtains,
doors or other materials block the signals from
• The air conditioner will not operate if curtains,
the remote control to the indoor unit.
doors or other materials block the signals from
the remote control to the indoor unit.
• Prevent any liquid from falling into the remote
control. Do not expose the remote control to
• Prevent any liquid from falling into the remote
direct sunlight or heat.
control. Do not expose the remote control to
• If the infrared signal receiver on the indoor direct sunlight or heat.
unit is exposed to direct sunlight, the air
• If the infrared signal receiver on the indoor
conditioner may not function properly. Use
unit is exposed to direct sunlight, the air
curtains to prevent the sunlight from falling on
conditioner may not function properly. Use
the receiver.
curtains to prevent the sunlight from falling on
• If other electrical appliances react to the the receiver.
remote control, either move these appliances
• If other electrical appliances react to the
or consult your local dealer.
remote control, either move these appliances
or consult your local dealer.
insert two new alkaline dry batteries
insert two new alkaline dry batteries
(2x AAA1.5Volt). Make sure that the polarity of
(2x AAA1.5Volt). Make sure that the polarity of
(+) or (-) is installed correctly.
(+) or (-) is installed correctly.
tips and information
tips and information
• When changing batteries, do not use old or
• When changing batteries, do not use old
varied ones, otherwise, it may cause problems
or varied ones, otherwise, it may cause
with the remote control.
problems with the remote control.
• If the remote control is not used for a long time,
• If the remote control is not used for a long
remove the batteries as old batteries may leak
time, remove the batteries as old batteries
or corrode and damage the remote control.
may leak or corrode and damage the remote
• The battery life during normal use is about six
control.
months.
• The battery life during normal use is about six
• If the remote control does not operate normally,
months.
please remove and refit the batteries. If
• If the remote control does not operate
abnormal operation continues, replace with new
normally, please remove and refit the
batteries.
batteries. If abnormal operation continues,
replace with new batteries.
7
7