Set Time Of Day; Set Current Day; Set Today's Date; Select Zones And Set Their Run Times - Nelson SmartZone EZ Serie Guía De Instalación Y Programación

PROGRAMMING INSTRUCTIONS

Set Time of Day

Turn the large dial to the TIME position. Press ADJUST
no A.M. indicator.

Set Current Day

Turn the large dial to the CURRENT DAY position. Press SELECT
indicator over the current day. SELECT
SELECT will advance the

Set Today's Date

Turn the large dial to the DATE position. Press ADJUST
The YEAR will automatically advance upon rolling over 12/31.
NOTE: A DATE is only required if you intend to use ODD/EVEN scheduling or to set a start
date, other than the current date, for INTERVAL scheduling.

Select Zones and Set Their Run Times

A zone run time determines the duration a zone will run.
Turn the large dial to the ZONE / RUN TIME position. Press SELECT
want for the selected program (A, B, or C). With the zone number displayed on the LCD, press
ADJUST to adjust the RUN TIME for that zone. RUN TIMES can be set from 1 minute to 9
hours 59 minutes. Continue selecting zones and adjusting their run times until you have all the
zones you want in the selected program.
will advance the
indicator to the left.
to scroll to the correct time. There is
to position the current day
indicator to the right;
keys to scroll to the current date.
to select the zone you
13