Technical Data/Specifications - Nelson SmartZone EZ Serie Guía De Instalación Y Programación

TECHNICAL DATA
1. Transformer
24 VAC internal transformer; 20 VA, .83A for zones and logic. The transformer can run a pump or
master valve and one zone valve, maximum.
2. Surge Protection
7 joule MOV across secondaries. (see Circuit Breaker below)
3. Sensor Operation
The SmartZone
must have normally closed connections (leads). The factory-installed jumper wire must be in
place if no sensor is used.
4. Zone Lines
The SmartZone
pump/master valve. Each zone output can operate one solenoid.
I inrush .52A max
I hold .40A max
EZ is configured to operate the controller with or without a sensor. Sensors
TM
TM EZ will operate a maximum of two (2) outputs concurrently, providing one is the
22