Set Water Days Scheduling Option - Nelson SmartZone EZ Serie Guía De Instalación Y Programación

PROGRAMMING INSTRUCTIONS
NOTE: The MODE dial must be in the "Program" position to set a schedule.
When the dial is set to any of the scheduling options, the LCD will display the currently scheduled
program (default is a 1 day interval schedule with today's date for a start date). Be sure the
PROGRAM dial is set on the program you want to change (A, B, or C) and that you want to
change the current schedule. A scheduling option is chosen after you press a button, either
SELECT or ADJUST. The old schedule is replaced with the new one. If you want the old
schedule back, it's easy to reprogram with the following procedures.

Set Water Days Scheduling Option

Turn the large dial to the WATER DAYS scheduling option. The last scheduling option chosen for
the current program or the default 1 day interval scheduling option will appear on the LCD. Press
the SELECT button to select that day for watering or press SELECT
A flashing indicator
selected days to water. The
or key press. Continue selecting or deselecting the days you want the controller to water
until you have your 7 day calendar set.
NOTE: Programming a WATER DAYS schedule deletes any other schedule for the selected
program.
appears over the day you're about to set. Rain drops
indicator automatically moves one day to the right after a SELECT
for non-watering days.
appear over
17