Programs/Program Overview; Programming; Scheduling - Nelson SMARTZONE Manual De Instrucoes

PROGRAMMING INSTRUCTIONS
OPERATION:
OFF
TIME
ON
SENSOR
START TIME
OVERRIDE
ZONE/
RUN TIME
%WATER BUDGET
PROGRAM INTERVAL
S M T W TH F S ODD/EVEN
OFF/ON
PROGRAM ZONE NEXT PROGRAM
ZONE NUMBER
SENSOR
ON/OFF ON/OFF (HOLD FOR REVIEW)
OVERRIDE
OPERATION:
OFF
TIME
ON
SENSOR
START TIME
OVERRIDE
ZONE/
RUN TIME
%WATER BUDGET
PROGRAM INTERVAL
S M T W TH F S ODD/EVEN
OFF/ON
PROGRAM ZONE NEXT PROGRAM
SENSOR
ON/OFF ON/OFF (HOLD FOR REVIEW)
OVERRIDE
6. Program Review
To easily review what you have programmed, press and hold the Next
Program key for 3 seconds. The current program letter will be
displayed throughout the review. First, the SmartZone™ will scroll
through all start times (1-4) for that program. Next, the SmartZone™
will scroll through all zone run times included in the chosen program.
The number shown in the time of day position on the LCD is the total
accumulated run time for the program being reviewed. It is the total
time this program will water.
To review a different program, change the program displayed (as in
Item 4). To stop program review, press any key.
7. Zone Number
The zone number buttons are used in conjunction with setting a run
time, manually starting a zone, or checking zone run times.

PROGRAMMING

• setting the items that effect program function
• when does the SmartZone™ water
• how long does each zone water
• what days does the SmartZone™ water
1. Set Time of Day
Press blue Time key on circular pad. The time block on the LCD will
blink. Use the gray triangle
OPERATION:
OFF
TIME
ON
SENSOR
START TIME
OVERRIDE
ZONE/
RUN TIME
%WATER BUDGET
PROGRAM INTERVAL
S M T W TH F S ODD/EVEN
OFF/ON PROGRAM ZONE NEXT PROGRAM
ZONE NUMBER
SENSOR
ON/OFF ON/OFF (HOLD FOR REVIEW)
OVERRIDE
NOTE: Every time the or
or decrease one minute; Hold the
initiate a fast scroll.
6
PROGRAMMING:
TIME
START
TIMES
%
WATER
BUDGET
RUN
ODD / EVEN
TIME
INTERVAL
PROGRAMMING:
TIME
START
TIMES
%
WATER
BUDGET
RUN
ZONE NUMBER
ODD / EVEN
TIME
INTERVAL
and keys to scroll to the correct time.
PROGRAMMING:
TIME
START
TIMES
%
WATER
BUDGET
RUN
ODD / EVEN
TIME
INTERVAL
key is pressed, the time will increase
or key for three seconds to
2. Set Current Day
Press blue Current Day key on circular pad. A triangle on the LCD above
the "S" for Sunday will blink. Use gray triangle
CURRENT
key to scroll left. Position the cursor on the current day.
DAY
OPERATION:
DATE
TIME
START TIME
ZONE/
RUN TIME
DAILY
PROGRAM
S M T W TH F S ODD/EVEN
OFF/ON
CURRENT PROGRAM ZONE
SENSOR
ON/OFF ON/OFF
DAY
OVERRIDE
3. Set Today's Date
DATE
Press the blue Date key on circular pad. The date area on the LCD
(located at run time position) will blink and default to 01/01 (month/day
or day/month when using 24 hour clock). Use gray
DAILY
increment or decrement date as needed.
OPERATION:
TIME
START TIME
ZONE/
RUN TIME
PROGRAM
S M T W TH F S ODD/EVEN
OFF/ON PROGRAM ZONE
SENSOR
ON/OFF ON/OFF
OVERRIDE
NOTE: A date is only required when using odd/even scheduling.
A date is helpful in the Interval scheduling mode to view the next
watering day, or set the first day of the interval, but it is not required.

SCHEDULING:

SmartZone™ controllers have three scheduling options. A Daily
schedule lets you choose which days of the week you want to water
(i.e. Monday, Wednesday, Friday). An Odd/Even watering schedule
tells the controller to water on either the odd or even days of the
month (i.e., the controller will water on the 31st and the 1st when odd
is chosen). An Interval schedule waters every X number of days (i.e.,
water every 3 days, water every 10 days, etc.) A value of 1 in an
interval schedule means to water every day.
A scheduling option is chosen as soon as you press the button (Daily,
Odd/Even or Interval). Be sure the desired scheduling option is
displayed on the LCD for each program used. If you have set a
scheduling option and then press another scheduling button, the last
button pushed will be the schedule type for that program. When you
return to a previously programmed scheduling type, whatever you have
previously programmed is the new default for that scheduling option.
CURRENT
DAY
DATE
DAILY
key to scroll right or
PROGRAMMING:
START
OFF
TIMES
ON
SENSOR
OVERRIDE
%WATER BUDGET
INTERVAL
%
WATER
BUDGET
RUN
NEXT PROGRAM
ZONE NUMBER
TIME
(HOLD FOR REVIEW)
INTERVAL
PROGRAMMING:
START
OFF
TIMES
ON
SENSOR
OVERRIDE
%WATER BUDGET
INTERVAL
%
WATER
BUDGET
RUN
NEXT PROGRAM
ZONE NUMBER
TIME
(HOLD FOR REVIEW)
INTERVAL
TIME
CURRENT
DAY
DATE
DAILY
ODD / EVEN
and to
TIME
CURRENT
DAY
DATE
DAILY
ODD / EVEN