Siemens TK 52 Serie Intrucciones De Uso página 20

Ocultar thumbs Ver también para TK 52 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
en
16
● Fill the water tank with lukewarm water,
add descaling agent and dissolve
completely (total liquid: 0.5 litres).
or pour prepared descaling mixture into the
water tank (total liquid: 0.5 litres).
● Press the steam button
The descaling process begins. Duration
approx. 10 minutes. The descaling
solution flows into the water tray 18.
† The
LED flashes.
J
● Place a suitable container (approx. 0.5
litres) under the nozzle 8.
● Set the dial 6 to
process begins. Duration approx.
5 minutes. The descaling solution flows
into the container.
† The
LED lights up.
I
● Empty and reinsert the grounds tray 17.
† The steam LED
● Empty and clean the water tank 11, fill
with fresh water up to the "max" mark and
reinsert.
● Place a suitable container (approx. 0.5
litres) under the nozzle 8.
● Press the steam button
process begins. Water flows into the
container.
† The
LED lights up.
J
● Turn the dial 6 to O. The cleaning process
begins. Duration approx. 10 minutes.
Liquid flows into the coffee grounds tray
17 inside the appliance, then out through
the coffee outlet.
† The
LED lights up.
I
● Empty, clean and reinsert the trays 17
and 18.
The appliance heats up and is ready for
use again when the stand­by LED
green.
Important: If the service programme is
interrupted, e.g. due to a power cut, it is
vital that the appliance be rinsed before it is
used again.
16
.
h
/
. The descaling
g
h
flashes.
h
. The cleaning
h
a
● Press the stand­by button
† The stand­by
flash.
● Rinse the water tank 11 thoroughly and fill
with fresh water.
● Press the steam button
is rinsed and liquid flows into the tray.
†The
J
● Hold a cup under the nozzle 8 and turn
the dial 6 to
cup.
† The
J
● Turn the dial 6 back to O.
The appliance rinses and is ready for use
again.
Anti­freeze
In order to avoid damage through cold
during transportation and storage, the
appliance must be emptied completely
first.
The appliance must be ready for use.
● Remove, empty, and replace water tank.
● Place a large, narrow container under
nozzle 8.
● Press
● As soon as
dial 6 to
The appliance will release steam for a
while.
● When nozzle 8 stops releasing steam,
turn dial back to 'O'.
● Turn off the appliance.
Disposal
This appliance is labelled in accordance
lights
with the European Directive 2002/96/EG
relating to waste electrical and electronic
equipment – WEEE. The directive provides
the framework for the EU­wide take­back
and disposal of end­of­life appliances.
Please ask your specialist retailer about
current disposal facilities.
and steam
a
h
LED flashes.
/
. Water runs into the
g
h
LED lights up.
button.
h
lights up on display, turn
J
/
.
g
h
A
en
.
a
LEDs
h
. The appliance

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido