VATECH PaX-i3D Smart Manual Del Usuario página 10

No. Item
X-RAY SENSOR
1
(CEPH)
NASAL POSI-
2
TIONER
EAR ROD
3
SECONDARY
4
COLLIMATOR
5 Vertical Frame
ROTATING UNIT
6
Enclosed
7 Component
Storage
X-RAY TUBE
8
Emergency
9
Switch
Vertical Frame
10 Up/Down Switch
(optional)
11 BASE (optional)
STATIONARY
12
COLUMN
CONTROL PANEL
13
CHINREST
14
TEMPLE SUP-
15
PORT
PaX-i3D Smart(PHT-30LFO) User Manual
CEPH imaging sensor (optional).
- 1-1. One shot Type
- 1-2. Scan Type
- Positions the patient during CEPH imaging.
- The ruler for use to compensate the acquired image that is different from
actual size.
Secures the patient's head during CEPH imaging.
Limits the X-Ray irradiation field for CEPH scanning.
Holds the Rotating Unit.
Use the Vertical Frame Up/Down switch.
Rotates around the patient's head during exposure (depending on the imag-
ing mode).
Place where bite blocks, integrated chin rests and the other components
are stored.
The source of X-Ray emission.
Powers off the equipment when there is a problem during operation.
Adjusts the height of the vertical frame.
Used to balance and stabilize the equipment.
The portion of the column fixed to the base unit.
Allows the operator to control certain functions of the equipment and dis-
plays operational parameters.
Supports the patient's chin during image acquisition.
Supports the patient's temples during PANO scan.
1 PaX-i3D Smart Imaging System Overview
Details
09