VATECH PaX-i3D Smart Manual Del Usuario página 46

4.2.3
Sensor
PaX-i3D Smart(PHT-30LFO) User Manual
SMV
Follow the procedure below to prepare and position the patient.
1. Turn the CEPH ear rods to SMV mode position as shown in the figure.
After adjusting the column to suit the height of the patient, fit
the ear rods along the patient's ear canals.
CAUTION
4 Acquiring CEPH Images
2. Widen the distance between the two ear rods.
3. The nasal positioner should be flipped to the
side and up to prevent it from obstructing the image
acquisition.
4. Guide the patient to the CEPH unit.
5. Adjust the height of the unit to suit the
patient by pressing the column up/down
button or switch (optional).
6. Ask the patient to stand upright facing
the X-Ray tube.
Make sure that the patient's shoulders are
level and that his/her neck is relaxed.
45