VATECH PaX-i3D Smart Manual Del Usuario página 57

5 Acquiring CT Images
Hygiene cover
Bite block
56
Positioning the Patient
The hygiene cover for the bite block is intended for single
use only. Always replace the hygiene cover for each new
WARNING
patient.
Disinfect the Chinrest and bite block using an alcohol-
based cleaning solution and wipe away all residue with dry
CAUTION
cloth before each new patient.
4. Guide the patient —facing the Chinrest — to the equipment.
5. Adjust the height of the column using the column up/down button or switch
(optional) until the patient's chin rests comfortably on the Chinrest.
1. Insert the bite block into the Chinrest
receptacle on the equipment.
2. Place a new hygienic cover over the
bite block.
3. Open the temple supports by clicking
the Temple Support Wheel Adjustment
button.
PaX-i3D Smart(PHT-30LFO) User Manual