VATECH PaX-i3D Smart Manual Del Usuario página 27

3 Acquiring PANO Images
26
Positioning the edentulous patient
5. Adjust the equipment to the patient's height by using the Vertical Frame up/
down button or switch until the patient's chin rests comfortably on the Chinrest.
6. Ask the patient to:
■ Stand upright
■ Firmly grip the handle
■ Lean his/her chest lightly against the equipment
■ Position his/her feet slightly forward and open stance
1. Remove the bite block from the Chinrest
receptacle on the equipment.
2. Insert the Sinus/Edentulous Bite into the
chinrest.
3. Open the temple supports by clicking
the temple support adjustment button.
4. Guide the patient —facing the Chinrest
— to the equipment.
7. Have the patient
■ Close his/her lips around the bite block
■ Keep his/her tongue pressed against
his/her palate
■ Close his/her eyes
Ask the patient to remain still until
scanning is completed.
PaX-i3D Smart(PHT-30LFO) User Manual