Compliance With Guidelines And Standards; Commissioning; Specifications; Machine Logbook; Recommendations For Use And General Safety - FIXATOR LM Serie Instrucciones De Uso

Extensions to the pendant control station (5G1) :
- 15m : ref 540134
- 30m : ref 540136
1.3 Compliance with guidelines and standards;
commissioning
This machine is manufactured under a quality
process according to EN-ISO 9001: 2015.
CMU/WLL (kg/lbs)
Motor P (kW)
Voltage (V)
I Nominal / start (A) @60Hz
I Nominal / start (A) @60Hz
Weight (kg)
Dimensions (mm)
T° for use (° C)
Operating Speed (m/s) @60Hz
Operating Speed (m/s) @60Hz
Wire rope Ø and type
Minimum breaking load (kg)
Upper limit switch
Lower limit switch
Service factor
* Use between -20° and -10°C is possible
providing a gradual and uniform preheating
unloaded operation is carried out, then the load can
be applied as soon as the hoist reaches a T ° - 10°C.
1.5

Machine logbook,

The contents of the logbook of this machine are not
provided; it is up to the owner to create or acquire
one in which the following is noted:
- the name of the person in charge of
equipment
- operator names and dates / periods of use
- serial numbers of components
- the number of hours of use,
- the characteristics of the cables used
- the number of hours the cables are used,
- a record of incidents and actions taken to
remedy them
- forecast dates of periodic inspections and
record of actual dates of inspections
INSTRUCTION MANUAL
Electrical winches LM+
Type 461E / LM300S+
300kg / 660lbs
230V 50/60Hz
Ø6.5 to 6.8 - 6x19 galvanized steel, mixed core
S3 60% 30cy/h
A test prior to initial commissioning and after each
maintenance or dismantle must be performed with a
static test coefficient of 1.25xWLL and a dynamic
test coefficient of 1.1xWLL.
1.4

Specifications

The LM winch has a working load limit (WLL)
displayed on the winch plate.
461C / LM500+
500kg / 1100lbs
1.1
7/21A
9/21A
34
255x240x809
-10°C / +55°C *
0.12 (7m/mn)
0.14 (8m/mn)
2500
Yes
Yes
1.6 Recommendations for use and general
safety
Before using this equipment, ensure:
- that you read and understand this entire
manual
- that no obstacles will obstruct the required
motion
- that the periodic
performed and recorded,
- that the electrical installation is designed and
protected according to current regulations
- that your material is stable and aligned, freely
with the load
- the load or machine movements will not trap
or crush you or other people; signal and block
access to the area under the load
- you can communicate with help in case of
need,
- that you have adequate lighting
ensure :
- every day the correct operation of the
mechanisms, brakes, and emergency stop
- periodically the
switches, structural elements and wire ropes
Réf : 1813000204
Page : 4/20
Version : 46/18
461D / LM450+
450kg / 1000lbs
110V 60Hz
/
18.5/30A
35
303x240x809
S3 50% 30cy/h
inspection has been
electrical cables, limit