Suspended Installation; Installation With Deflection - FIXATOR LM Serie Instrucciones De Uso

2.1.1 Suspended installation

It's the simplest mounting and the most common.
Device in suspension and direct traction or lifting.
The anchoring of the device must be done
exclusively by its hook and never by its handle.
There is no way to anchor the hook of the cable to
the fixed point to get the device moving on the
cable.
of connection capabilities to ensure your safety.

2.1.2 Installation with deflection

- Device suspended ; indirect traction or lifting.
INSTRUCTION MANUAL
Electrical winches LM+
The hook of the machine
must be placed in the body
of the attachment point, so
that this body is at bottom
of hook. The pawl of
safety of the hook must
close completely.
If a gene appears in the
articulation of
apparatus with the body of
fixing hook, it is necessary
to interpose a sling of
appropriate capacity.
Check each element
This case requires a deflection pulley anchored to a
fixed point.
- Device on ground and lifting through a deflection
pulley.
( this is not a reeving; refer to §2.1.4)
the
The resistance of the pulley and its
anchorage must be calculated for a double effort of
the lifted load.
Réf : 1813000204
Page : 6/20
Version : 46/18