Panasonic AG-DV2500 Instrucciones De Funcionamiento página 36

RECORDING
Top MENU
– – – M E N U – – –
S Y S T E M . .
R E MO T E . .
A U D I O / V I D E O . .
T I M E C O D E . .
D I S P L A Y S E T . .
C L O C K A D J U S T . .
F A C T O R Y S E T T I N G C A N C E L
D R UM H O U R M E T E R 0 0 0 0 0 0 H
E X I T
TIME CODE menu
Minute
Time Code
Hour Second
– – – T I M E C O D E – – –
T C 0 0 : 0 0 : 0 0 : 0 0
C L E A R C A N C E L
N D F / D F ( N T S C ) D R O P
D V T C D U P . O F F
T C O U T O F F S E T O F F
P A G E B A C K
Framing mode
(NTSC only)
Resetting the time code
to zero:
1
Select the CLEAR menu
item.
2
Set the value to EXECUTE
and press the SET button
(remote controller) or the
PAUSE button (Main unit).
Memo
Framing mode (NTSC only)
DROP
:Time codes that match
the actual time.
NON DROP
:Use this setting if the
number of frames is
important.
Recording time codes of a DV input terminal:
• Set the DV TC DUP. item of the TIME CODE menu to ON.
• When the DV TC DUP. item is set to ON, the time code and user-bits form the DV terminal are
recorded.
Memo
If the REC button is held down in the STOP mode when the DV TC DUP. item is set to ON, the EE signals of the
time codes from the DV input terminal can be checked.
E-36
1.
Display the top MENU.
Remote controller
Press the MENU button.
2.
Display the TIME CODE menu.
Remote controller
Select the TIME CODE item
with the
press the SET or
Frame
3.
Preset the time code (hour, minute, second and frame).
Remote controller
1
Select the TC item with the
/
SET or
¥ The hour digits blink.
2
Press the
shift to the next digit seg-
ment.
3
Press the
change the value of the
blinking digits.
4
Repeat steps
above and set all the val-
ues. Press the SET button.
4.
Set the framing mode (NON DROP / DROP) ... (NTSC only)
Remote controller
1
Select the NDF/DF item
with the
press the SET or
2
Press the
select the value.
3
Press the SET button to
confirm the setting value.
5.
Return to the usual screen.
Remote controller
Press the MENU button.
– Setting time codes –
/ button and
button.
button and press the
button.
/ button to
/ button to
2 3
and
/ button and
button.
/ button to
Main unit
Press the EJECT and STOP
buttons simultaneously while
no cassette is loaded.
Main unit
Select the TIME CODE item
with the PLAY/STOP button
and press the PAUSE or FF
button.
Main unit
1
Select the TIME CODE item
with the PLAY/STOP button
and press the PAUSE or FF
button.
2
Press the FF or REW but-
ton to shift to the next digit
segment.
3
Press the PLAY/STOP but-
ton to change the value of
the blinking digits.
4 2 3
Repeat and
above and set all the values.
Press the PAUSE button.
Main unit
1
Select the NDF/DF item with
the PLAY/STOP button and
press the SET or FF button.
2
Press the PLAY/STOP but-
ton to select the value.
3
Press the PAUSE button to
confirm the setting.
Main unit
Press the EJECT button.
steps