HACH LANGE LOC 100 Manual Del Usuario página 65

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 75
Certification (Integrated RFID module)
FCC ID: YCB-ZBA987
IC: 5879A-ZBA987
This device complies with Part 15 of the FCC rules and Industry Canada
license exempt RSS standard(s).
Operation is subject to the following two conditions:
1.
this device may not cause interference, and
2.
this device must accept any interference, including interference that
may cause undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
1.
l'appareil nedoit pas produire de brouillage, et
2.
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement."
Changes or modifications to this equipment not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be
required to correct the interference at their expense. The following
techniques can be used to reduce interference problems:
1.
Disconnect the equipment from its power source to verify that it is
or is not the source of the interference.
2.
If the equipment is connected to the same outlet as the device
experiencing interference, connect the equipment to a different
outlet.
3.
Move the equipment away from the device receiving the
interference.
4.
Reposition the receiving antenna for the device receiving the
interference.
5.
Try combinations of the above
WA R N I N G
The instrument may not be used in dangerous environments.
The manufacturer and its suppliers reject any express or indirect guarantee for
use with high-risk activities.
Follow the following safety information, in addition to any local guidelines
in force.
Safety information for the correct use of the instrument:
Do not operate the instrument in hospitals or comparable
establishments in the vicinity of medical equipment, such as pace
makers or hearing aids.
Do not operate the instrument in the vicinity of highly flammable
substances, such as fuels, highly flammable chemicals and
explosives.
Do not operate the instrument near combustible gases, vapors or
dust.
Do not vibrate or jolt the instrument.
The instrument can cause interference in immediate proximity to
televisions, radios and computers.
Do not open the instrument.
Improper use of the instrument voids the warrantee.
English 65

Publicidad

Tabla de contenido
loading

Tabla de contenido