Scope Of Delivery; Product Description - HACH LANGE LOC 100 Manual Del Usuario

Batteries
D A N G E R
Risk of fire and explosion.
Only use the NiMH rechargeable batteries (Type AA, 1.2 V / min. 2450 mAh)
provided in the measuring instrument and make sure that the batteries are
correctly inserted into the battery compartment. Incorrect insertion of the batteries
could cause damage to the instrument, fire or explosions.
Do not use nonrechargeable batteries under any circumstances. The use of
nonrechargeable batteries could cause damage to the instrument, fire or
explosions.

Scope of delivery

The LOC 100 scope of delivery comprises the following items:
• LOC 100 RFID read/write device
• USB cable
• Two AA NiMH batteries
• LOC 100 user manual
Note: If any of these items are missing or damaged, please contact the
manufacturer or the responsible sales representative immediately.
English 66

Product description

The LOC 100 RFID read/write device can be used to write the operator
ID and location ID onto a sample bottle label together with the time and
date.
Every sample bottle then clearly has the following information assigned
to it:
• Location — where was the sample taken?
• Time — when was the sample taken?
• Operator — who took the sample?
This information (sample ID) can then be read by an RFID-compatible
photometer so that it can be saved together with the test results. This
allows the sample location, sample time and the operator to be
documented consistently.
The RFID starter set for sample identification comprises:
• The LOC 100 RFID read/write device
• Two operator RFID tags
• Five location RFID tags
• Five sets of sample bottle labels with sample RFID tags, in red (3
blue (3 , yellow (3 , green (3
×) ×)
All RFID tags can be written and read out as many times as required
using the LOC 100 or the RFID module in the photometer.
The following describes the writing and reading process of the individual
components in detail.
and black (3 .
×) ×)
,
×)