Publicidad
Idiomas disponibles
Idiomas disponibles
1-8
Rack Installation Guide
+ , !
1.
From the back of the rack, pull the switch out about 7 centimeters (cm) (about
3 inches).
The switch should lock in place.
2.
Attach the end of the cable-management arm to the inner-slide rail by inserting the
two tabs into the two slots until the retaining clip snaps into place (see Figure 1-7).
slots
inner-slide rail
retaining clip
-
' $$ )$ .
tabs
cable-management arm
Velcro strips
thumbscrew
safety release
latch
Publicidad
