Tabla de contenido
Publicidad
6
Safety Notes
6 Gloves should be worn during installation to
prevent crushing and cutting injuries.
6 The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6 The hot and cold supplies must be of equal
pressures.
Installation Instructions
• The fitting must be installed, flushed and tested
after the valid norms.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Hansgrohe mixers can be used together with hydrau-
lically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
4
English
Symbol description
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 6
Do not use silicone containing acetic
acid!
Dimensions (see page 14)
Flow diagram
(see page 14)
Operation (see page 17)
Spare parts (see page 19)
Special accessories
special tool (58085000) order as an
extra
Installation putty order as an extra
Cleaning (see enclosed bro-
chure)
Publicidad
Tabla de contenido
