LANDMANN 42262 Instrucciones De Montaje, Mantenimiento Y Uso página 4

• If you see, smell or hear hissing of gas escaping
from the LP gas cylinder, move away from the
LP gas cylinder. DO NOT attempt to correct the
problem yourself and call the fire department.
• If a grease fire occurs, turn • OFF the burner and
leave the lid closed until the fire is out.
• DO NOT alter this grill in any manner. Any alteration
automatically voids the warranty.
• DO NOT use the grill in high wind situations.
The LP gas supply cylinder to be used must be
constructed and marked in accordance with
the Specification for LP Gas Cylinders of the
U.S. Department of Transportation (DOT) or the
National Standard of Canada, CAN/CSB-b339
(Cylinders, Spheres, and Tubes for transportation
of Dangerous Goods).
A fire causing death or serious
injury may occur if the following is
not followed exactly:
NEVER store or use gasoline or other
volatile substances in the vicinity
of this grill. NEVER store a spare
propane cylinder in the vicinity of
this grill, or in the vicinity of another
potential heat source.
DO NOT store spare gas cylinder in
or near grill.
Place dust cap on cylinder valve outlet
whenever the cylinder is not in use.
Install only the type of dust cap on
cylinder valve outlet that is provided
with the cylinder valve. Other types of
caps or plugs may result in leakage of
propane.
State of California Proposition 65 Warnings
This product
known to the State of California to
cause cancer and birth defects or
other reproductive harm.
Important Safety Information
Portable LP gas grills require a fuel delivery system
which is comprised of a regulator and an L.P. gas
supply cylinder.
To avoid the possibility of tipping over the grill, NEVER
place more than 5 pounds on the side table.
Be sure to tighten all hardware (screws, nuts, bolts,
etc.) several times a year and before each grilling
season
NEVER leave cooking food unattended. Continually
observing the food will help in maintaining an even
temperature, conserve fuel, improve the food's flavor
and lessen flare-ups.
Set up for Grilling
1. Release lid by undoing Velcro strap
2. Install grease cup
3. Attached propane cylinder
4. Ready for grilling
Prepare for transporting
1. Make sure grill is cool
2. Remove propane cylinder
3. Remove & clean grease cup
4. Secure lid with Velcro strap
5. Ready for transport
Caution: If transporting in a vehicle make sure to
use plastic or a tarp underneath the grill in case of
any grease or oil leaks.
contains chemicals
4