Set Up Sensor - Oregon Scientific WMR100TH Manual De Usuario

Install the base station batteries (4 x UM-3 / AA)
matching the polarity + and -. Press RESET after each
battery change.
NOTE Do not use rechargeable batteries. It is
recommended that you use alkaline batteries with this
product for longer performance.
The battery icon indicator
following areas:
AREA MEANING
Weather Battery in the base station is low.
Forecast Area
will show when AC adapter is
disconnected.
Temperature The displayed channel indicates
/ Heat Index / the outdoor sensor for which
Wind Chill Area battery is low.
may appear in the
Wind Speed / Battery in the wind sensor is low.
Wind Direction
Area
UVI / Barometer Battery in the UV / Rain sensor
/ Rainfall Area is low.

SET UP SENSOR

To set up sensor:
1. Slide battery door open.
2. Insert the batteries, matching the polarity (+ and -).
3. Use CODE to select the channel.
4. THGR810 only - Set the temperature unit.
5. Place the sensor near the main unit. Press RESET
on the sensor. Then, press the approriate main unit
8