Sanus VLL5 Manual De Instrucciones página 13

3. Remove the wall plate template
CAUTION:
Be sure the anchors
11
4. Install the wall plate
NOTE: Hold the wall plate
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
movement of the wall plate
3
10
and insert four anchors
14
are seated flush with the concrete surface.
13
using four lag bolts . Firmly tighten all four lag bolts
11
in place when tightening the first lag bolt
11
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
14
10
14
.
13
until they are pulled flush against the wall plate
13
to keep the plate from shifting out of place.
13
4
MUST BE firmly tightened to prevent unwanted
13
11
11
.
13