Technical Specifications; Symbols Used; Warranty - Kinetec Centura B&W Manual De Empleo

Product information

Technical specifications

Product:
Lifespan of the machine:
Weight:
Splint dimensions:
Angular limits:
Speeds:
Patient sizes:
Maximum weight of the user:
Acoustic pressure:
Applied parts:
Electricity:
Power supply:
Frequency:
Power consumption:
Class:
Protection classification:
Protection class (carrying case):
Fuse:
Environment:
Storage/transport conditions:
Operating conditions:

Symbols used

Consult the accompanying
documentation
or Operational warning
STOP (power off)
ON (power on)
Start movement
Stop movement
Program access
Extension limit
Right way up when box is stored
IP20
See "Protection class" in section
IP01
"Technical specifications"
~
Alternating current
Class II device

Warranty

KINETEC
The ® warranty is strictly limited to the replacement, free of charge, or to factory repairs of part(s) recognised as defective.
Kinetec SAS guarantees its continuous passive motion systems for 2 years against all defects of manufacture from the date of purchase by the consumer.
Kinetec SAS is the only organization able to assess the application of the warranty to its systems.
The warranty will be considered null and void if the device has been used abnormally or under conditions of use other than those indicated in the user's manual.
The warranty will also be considered null and void in the event of deterioration or an accident due to negligence, inappropriate surveillance or inappropriate maintenance,
or due to transformation of the equipment or an attempt to repair the equipment.
Kinetec Centura B&W™
12 years
complete Centura B&W: 22 Kg (48.5 pounds)
56cm (22 ins.) x 100cm (39 ins.) x 76cm (30 ins.)
see page 10
from 45 to 130° per minute
1.40m (4ft. 7ins.) to 2m (6ft. 7ins.)
135 kg (297 pounds)
<70dB
Hygienic pads, straps, seat and backrest
100-240V~
50/60 Hz
50 VA
Device of Type BF Class II or Type B Class I
IP 20 (Protected against solid objects greater than 12.5mm,
but not protected against liquids)
IP 01 (non-protected against solid foreign objects,
protected against vertically falling water drops)
T 750mA 250V 6.3 x 32mm (KINETEC® order: 4610007434)
Temperature:
Relative humidity:
Temperature:
Relative humidity:
Atmospheric pressure:
Speed
Timer
Force
Pause
Increase
Decrease
Flexion limit
Temperature Limit during storage or
transport
Keep dry during storage or transport
Follow the instructions for use
TYPE BF device
(protection against electric shocks)
22/24
-25 to +70°C / -13 to +158°F.
up to 93% without condensation.
+5 to +40°C / +41 to +104°F.
15% to 93% without condensation.
700 hPa to 1060 hPa.
Arm straight flexion/extension
movement
Arm flexed flexion/extension movement
Hand control locked
Hand control unlocked
Hand control half locked
Fault or power-on indicator
Do not push
Fragile
Humidity limit during storage or
transport
Contains electric and electronic
components; not to throw in the
dustbins of household refuse
TYPE B device
(protection against
electric shocks)
EN