Installer Code; User Code 1; Arming The Alarm With Or Without Code; Pstn Line Call Numbers - SOMFY 2401241 Manual De Instrucciones

Installer code

The installer code can be used to customise the access codes for your system and arm it with or
without an access code.
The factory installer code is 2222.
It is essential to customise the installer code.
You now have 2 minutes to enter the new installer code XXXX by typing:
2 0 X X X X

User code 1

The user code can only be used to arm or disarm the system.
The factory user code is 1111.
It is essential to customise the user code.
You have 2 minutes to enter the new user code 1 ZZZZ by typing:
2 1 Z Z Z Z

Arming the alarm with or without code

By default, the keypad is supplied to permit arming without code.
If you want to arm the alarm with code, you have 2 minutes to type:
2 6 0
If you want to arm the alarm without code, you have 2 minutes to type:
2 6 1

PSTN line call numbers

To store 4 telephone numbers for sending synthesised voice alarm messages to neighbours', family
members' or friends' mobile or fixed telephones:
You have 2 minutes to type phone number 1 (max. 15 digits):
3 1 0 1 T T T T T T T T T T T T T T T
You have 2 minutes to type phone number 2 (max. 15 digits):
3 1 0 2 A A A A A A A A A A A A A A A
You have 2 minutes to type phone number 3 (max. 15 digits):
3 1 0 3 B B B B B B B B B B B B B B B
You have 2 minutes to type phone number 4 (max. 15 digits):
3 1 0 4 C C C C C C C C C C C C C C C
Copyright © 2015 Somfy SAS. All rights reserved.
X X X X #
Z Z Z Z #
0 #
1 #
T T T T T T T T T T T T T T T #
A A A A A A A A A A A A A A A #
B B B B B B B B B B B B B B B #
C C C C C C C C C C C C C C C #
5