Use; Partially Arming The Alarm; Fully Arming The Alarm; Disarming The Alarm - SOMFY 2401241 Manual De Instrucciones

Use

All the codes, in addition to the installer and user code 1, that are set using the PC interface
and or the LCD keypad can be used at the control keypad.

Partially arming the alarm

1
Press
or

Fully arming the alarm

1
Press

Disarming the alarm

1
Press
10
(maximum of 2 zones armed)
or
(3 zones armed)
2 Enter the 4-digit user code 1 unless you are
in "Arm without code" mode. Alternatively place the
badge on the reception area.
BEEP!
2 x at the central unit.
➜ ■
2 Enter the 4-digit user code 1 unless you are
in "Arm without code" mode. Alternatively place the
badge on the reception area.
BEEP!
3 x at the central unit.
➜ ■
2 Enter the 4-digit user code 1 or place the
badge on the reception area.
BEEP!
1 x at the central unit.
➜ ■
Copyright © 2015 Somfy SAS. All rights reserved.
or
or
or