Ovation B-2805FC QRG
Master/Slave
Connection
RDM
(Remote Device
Management)
Mounting
Product
Mounting
Diagram
Web Server
Control Panel
Description
The Ovation B-2805FC uses the DMX data connection for its Master/Slave mode.
See the User Manual for information about connect and configure the product for
master/slave operation.
Remote Device Management, or RDM, is a standard for allowing DMX-enabled
devices to communicate bi-directionally along existing DMX cabling. The
Ovation B-2805FC supports RDM protocol that allows feedback to monitor
temperature and changes to DMX Address and DMX Channel menu map options.
Download the User Manual from
Before mounting this product, read the
points per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our CHAUVET Professional line of mounting clamps, go
to http://trusst.com/products/.
The Ovation B-2805FC Web Server can be accessed by any computer on the same
network as the product. It allows network access to system information, settings
such as control protocol and starting address, color output testing, and the ability to
change the Web Server password.
To access the Web Server:
1. Set the IP address of the network to have the same first digit as the IP address of
the product.
2. Enter the IP address of the product into the URL bar of a web browser
application.
3. Enter both the user name and password as admin to log in.
Button
Function
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
www.chauvetprofessional.com
Safety
Notes. Use at least two mounting
Safety Cables
Mounting Clamps
Overhead Mounting
4
EN
for more details.