Gas safety
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, observe
the following precautions.
If you smell gas
•
Do not use any phone in your building.
•
Evacuate the room, building, or area of all occupants.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
•
If you cannot reach your gas supplier, call the fire department.
Checking for gas leaks
•
Leak testing of the appliance must be conducted according to the
manufacturer's instructions. Do not use a flame to check for gas leaks. Use a
brush to spread a soapy water mixture around the area you are checking. If
there is a gas leak, you will see small bubbles in the soapy water mixture at
the leak point.
NX9000K_CHEF_NX58M9960PS_AA_DG68-01008A-06_EN.indd 7
•
Close the valve and do not use the
range.
Do not light a match, candle, or
•
cigarette.
•
Do not turn on any gas or electric
appliances.
•
Do not touch any electrical switches or
plug a power cord into an outlet.
Electrical and grounding safety
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, observe
the following precautions.
•
•
•
•
•
•
Do not put a fuse in a neutral or ground circuit.
•
Use a dedicated 120-volt, 60-Hz, 10-amp, AC, fused electrical circuit for this
range. A time-delay fuse or circuit breaker is recommended. Do not plug more
than one appliance into this circuit.
•
Do not connect the ground wire to plastic plumbing lines, gas lines, or hot
water pipes.
•
This range must be Earth grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electrical shock by providing
a path for the electric current. This range is equipped with a cord having
a grounding plug. The plug must be firmly plugged into an outlet that is
properly installed and grounded in accordance with the local codes and
ordinances. If you are unsure whether your electrical outlet is properly
grounded, have it checked by a licensed electrician.
•
The range is supplied with a 3-pronged grounded plug. This cord must be
plugged into a mating, grounded 3-prong outlet that meets all local codes and
ordinances. If codes permit the use of a separate ground wire, we recommend
that a qualified electrician determine the proper path for this ground wire.
Plug into a grounded 3-prong outlet.
Do not remove the ground prong.
Do not use an adapter or an extension
cord.
Do not use a damaged power plug,
power cord, or loose power outlet.
Do not modify the power plug, power
cord, or power outlet in any way.
English 7
2019-02-27
2:26:13