Replacing Belt - Panasonic MC-V7572 Instrucciones De Operación

Belt Cover
Couvercle de
la courroie
Cubierta de
la Correa
Motor Shaf
t
Arbre d'entraînement du moteur
Eje de motor
Pulley
Poulie
Polea

Replacing Belt

Tab
Languette
Lengüeta
Belt
Courroie
Correa
- 36-
!
CAUTION
BELT AND MOTOR SHAFT
MAY BE HOT!
Make sure
completely cooled prior to replacing
belt.
➢ ➢ Ensure ON-OFF switch is OFF.
➢ ➢ Disconnect power cord from electrical
outlet.
➢ ➢ Replace belt whenever a burning
rubber smell caused by excessive
slippage occurs.
➢ ➢ Place CARPET/BARE FLOOR
selector in CARPET position.
➢ ➢ Remove belt cover by pressing on
tab and lifting off belt cover.
➢ ➢ Remove worn or broken belt.
➢ ➢ Loop new belt around motor shaft
and pulley; see illustration for correct
belt routing.
➢ ➢ Ensure that belt is not twisted or
pinched.
➢ ➢ Reinstall belt cover and snap into
place.
➢ ➢ DO NOT operate cleaner without belt
cover in place.
the vacuum has