GALAGAR SMART MIG 350 MP Manual Técnico De Instrucciones página 19

Equipos inverter de soldadura al arco
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. SAFETY
Welding is dangerous, and may cause damage to you and others, so take good protection when welding. For
details, please refer to the operator safety guidelines in conformity with the accident prevention requirements of
the manufacturer.
SMART MIG 350 MP
Professional training is needed before operating the machine.
Use labor protection welding supplies authorized by
national security supervision department.
Operators should be with valid work permits for metal
welding (gas cutting) operations.
Cut off power before maintenance or repair.
Electric shock—may lead to serious injury or even death.
Install earth device according to the application criteria.
Never touch the live parts when skin bared or wearing wet
gloves/clothes.
Make sure that you are insulated from the ground and
workpiece.
Make sure that your working position is safe.
Smoke& gas—may be harmful to health.
Keep your head away from smoke and gas to avoid
inhalation of exhaust gas from welding.
Keep the working environment well ventilated with exhaust
or ventilation equipment when welding.
Arc radiation—may damage eyes or burn skin.
Wear suitable welding masks and protective clothing to
protect your eyes and body.
Use suitable masks or screens to protect spectators from
harm.
Improper operation may cause fire or explosion.
Welding sparks may result in a fire, so please make sure
no combustible materials nearby and pay attention to fire
hazard.
Have a fire extinguisher nearby, and have a trained
person to use it.
Airtight container welding is forbidden
Do not use this machine for pipe thawing.
Hot workpiece may cause severe scalding.
Do not contact hot workpiece with bare hands.
Cooling is needed during continuous use of the welding
torch.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido