Main Parameter - GALAGAR SMART MIG 350 MP Manual Técnico De Instrucciones

This welding machine adopts IGBT hard-switching inverter technology. The 3-phase 380VAC input is rectified,
converted into HF AC by the IGBT inverter, reduced by the HF transformer, rectified by the HF rectifier and filtered,
and then DC output suitable for welding is achieved. Through this process, the dynamic response speed of the
welding machine is increased, and the size and weight of welding machine is reduced. With the closed-loop control
by the control circuit, the machine can compensate mains voltage fluctuation, and it is with excellent welding
performance.

4. MAIN PARAMETER

MODEL
Input power supply
Rated input capacity (KVA)
Rated output current (A)
Rated output voltage (V)
Rated duty cycle (%)
No-load voltage (V)
Output current range in MMA (A)
Output current range in MIG (A)
Output voltage range in MIG (V)
Electrode diameter applicable (mm)
Wire spool applicable (kg)
Wire feed speed range (m/min)
Wire feeder
Insulation class
Cooling mode
Protection class
Power factor
Efficiency (%)
Standard
Size (mm)
Weight (Kg)
SMART MIG 350 MP
3-phase 380V±15% 50HZ
GB15579.1－2004
MIG 350 (J93)
15
350
31.5
40
59±2V
20～350
50～350
15～38
0.8/0.9/1.0/1.2
20
1.5～15
embedded
F
Air-cooling
IP21S
0.93
85
900×400×670
51
21