Toto TBV02405U Manual De Instalación Y Del Propietario página 9

4. Handle Installation
WARNING:
●Factory setting for water
temperature handle is set at
104ºF(40ºC).
●Snap ring press fits within the
nut groove.
●Snap ring opening faces
downward.
a.Verify that snap-ring is still
attached and that the
opening on it is facing down.
b.Install handle onto cartridge and
verify that safety button and
"104" mark on panel are
centered.
c.Fasten screws with
screwdriver.
d.Place handle cap on.
INSTALLATION PROCEDURE
Small screw
Thermostat cartridge
The opening faces downward
Snap ring stablizes the
functionality of the temperature
control handle, minimizing
unnecessary vibrations.
Groove
Safety button
Handle
Handle cap
9
Snap ring
"104"
O-ring