Festo CPV GE-ASI-4E4A CE Serie Instrucciones Para El Usuario página 18

Recommendation: For addressing use addressing device
type ASI−PRG−ADR with adapter cable type KASI−ADR from
Festo.
Factory setting: Address #0
The addressing device scans the existing slaves in the
AS−Interface network.
Assign the desired address to the slave.
S
Parameterisation of the AS−Interface slave is not necessary.
Operation with AS−Interface masters < specification 3.0
Operation with AS−Interface masters < specification 3.0 is
fundamentally not possible.
3.3 Address assignment of the valves
The valve terminals may be configured as shown in the
following table:
18 0703NH
Festo CPV...−GE−ASI−4E4A−...−CE English