Sony PXW-X200 Manual Del Usuario página 14

Changes of other menus/warning indications
"LCD/VF SET" menu
• "NW Client Status" is added to "Display On/Off"
Turning the indication On/Off for the connection status to CCM in "NW Client Mode"
"NETWORK SET" menu
• "6Mbps" is added to "Bit Rate" in "Proxy File"
• The menu name of "Wi-Fi Remote" is changed to "Network Remote"
"OTHERS" menu
• "NW Client Mode" is added to "<1>" to "<5>" in "Assign Button"
Warning indications
There are changes and additions for warning indications. Contents of indications and measures are as
follows.
Warning indication on LCD/EVF
Before update
Cannot Record to SD card
NG:Preparing
Cannot Record to SD Card
-
-
-
14
After update
Cannot Record Proxy
NG:Preparing
Cannot Record Proxy
Cannot Connect to CCM
Invalid User Name or
Password
Cannot Connect to CCM
Invalid Address or Port
Number
Cannot Connect to CCM
Certificate is not yet valid
Cause and measures
The proxy recording function is being prepared. Wait a
while.
When streaming is started, proxy recording to "SD Card"
is not available.
Recording stops when recording is in progress. To start
proxy recording, stop streaming.
When the network client mode is enabled, proxy
recording is not available.
User name or password for connecting to CCM with the
network client mode may not be correct. Check the
settings.
The address of CCM for the connected equipment with
the network client mode may be not correct or a port
number that cannot be used may be input. Input the
correct value.
The CCM certificate is not valid. The date setting may be
set to an invalid value. Check the date setting.