Changing Default Media - Oki C5500n Guía De Referencia Rápida

Multi-Purpose Tray

Changing Default Media

Note
For the MP Tray, the default
settings are:
• Media Type = Plain.
• Media Size = Letter
To Set Transparencies as
the Default Media in the
MP Tray, see "For
Example" on page 3.
To Set Heavy Paper, Labels,
or Envelopes as the
Default Media in the MP
Tray
First, set the Media Size
1. Press E
NTER
mode.
2. Press + repeatedly until MEDIA
MENU appears on the display.
3. Press E .
NTER
TRAY1 PAPERSIZE
LETTER
4. Press + repeatedly until MPT
PAPER SIZE appears on the
display.
5. Press E .
NTER
The second line of the display
starts blinking.
6. Press + repeatedly until the
second line of the display shows
the Value (for envelopes, select
COM-10 ENVELOPE
to use.
to enter the Menu
) you wish
7. Press E
The setting is engaged and the
second line of the display stops
blinking.
8. Envelopes: If you are setting
the MP Tray for envelopes, press
O L
N
Heavy paper / labels: If you
are setting the MP Tray for
heavy paper or labels, keep
going.
Heavy Paper and Labels Only:
Set the Media Type
9. Press +.
MPT MEDIATYPE
PLAIN
10.Press E
The second line of the display
starts blinking.
11.Press + repeatedly until your
choice of CARD STOCK or
LABELS appears on the second
* line of the display.
12.Press Enter.
13.Press Back.
The setting is engaged and the
second line of the display stops
blinking.
14.Press O
The printer goes back on line.
7
twice.
NTER
and you are done.
INE
.
NTER
L .
N INE
*