Grounding Instructions; Safety Label - Tennant 2000 Manual Del Operador

- - All repairs must be performed by a
qualified service person.
- - Do not modify the machine from its
original design.
6. When transporting machine:
- - Get assistance when lifting machine.
- - Unplug cord from wall outlet.
- - Use tie- -down straps to secure machine to
truck or trailer.

GROUNDING INSTRUCTIONS

Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electrical shock. This machine
is equipped with a cord having an
equipment- -grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
Do not remove ground pin; if missing, replace
plug before use.

SAFETY LABEL

The safety label appears on the machine in the location indicated. Replace label if it is missing or becomes damaged
or illegible.
Tennant 2000/2010/2030/2040/2160/2170 (12- -05)
Home Find... Go To..
(120V models): This machine is for use on a
nominal 120- -volt circuit and has a grounding
attachment plug that looks like the plug illustrated
in the sketch. Make sure that the machine is
connected to an outlet having the same
configuration as the plug. No adaptor should be
used with this machine.
Grounded
3 Hole Outlet
Ground Pin
(120V)
WARNING LABEL - - LOCATED ON BACK
SIDE OF MACHINE HANDLE.
OPERATION
Grounded Outlet
Grounding
Edge/hole
(220V/230V/240V)
5