Connecting To Power; Powering On Your Speaker - Bose SOUNDLINK COLOR II Guia Del Usuario

G E T T I N G S TA R T E D

Connecting to power

Your speaker ships with a partial charge. Before using your speaker for the first time,
connect it to a USB wall charger or computer that is powered on. Your speaker does
not need to be fully charged, but it does require the initial connection to activate the
battery.
Note: Use a 1000 mA power source for the best speaker charging experience. Using
a power source with less than 1000 mA may result in a slower charging time or
your speaker may not be able to charge while playing audio.
1. Plug the small end of the USB charging cable into the micro-B USB connector on
your speaker.
2. Plug the other end into a USB wall charger or computer that is powered on.
The battery indicator blinks amber, and your speaker emits a tone. When fully
charged, the battery indicator glows green.

Powering on your speaker

On the button pad, press the Power button
• The first time the speaker is powered on, the Bluetooth® indicator blinks blue, and you
hear a voice prompt to select a language (see page 14).
• When the speaker has been powered on previously and at least one mobile device
has been paired, the Bluetooth® indicator blinks white and the speaker connects to
the last two mobile devices.
You hear "Battery <low/medium/high>. Connected to <mobile device name>."
The Bluetooth® indicator glows solid white.
1 0 - E N G L I S H
.