Prior To First Use - Lenco PPR-100 Manual Del Usuario

Prior to first use

DANGER – risk of fatal electric shock
Only connect the appliance to a properly
installed wall socket with the same mains
voltage rating as that shown in the
technical specifications.
Always insert the appliance directly into a
wall socket.
 Remove all of the packaging. Remove m the
protective films from the display if necessary.
You can operate the radio by connecting it directly to
the mains power or using the built-in rechargeable
battery.
Inserting the plug
To connect the radio to the mains power, you first need
to attach the correct plug to the recess on the back of
the appliance.
The shaped plug offers greater stability in the
wall socket, the European flat plug is suitable
for use in all European countries.
1. Press PUSH.
2. Slide the plug into the recess.
3. Release the PUSH button.
4. Insert the appliance directly into a wall socket.
 To remove the plug again – e.g. during battery
operation mode – press PUSH and remove the plug
by pulling it upwards.
10