Lenco PPR-100 Manual Del Usuario página 18

Not working. Is the rechargeable battery empty? Charge the radio. In some circumstances it can take
approx. 15 minutes until the battery is sufficiently charged for the radio to be switched on
again.
No audio Are there no audio files on your mobile device? Check in the relevant media folders. If
playback. necessary, refer to the instruction manual of your device.
Is the mobile device too far from the PPR-100 or not connected to the PPR-100?
Has playback been paused? Briefly press
Begin playback on your mobile device, if required.
Is the volume on the mobile device set too low?
Is the volume on the radio too low?
The radio is not Perform a reset.
responding.
No Bluetooth Is your mobile device Bluetooth
®
connection.
Is Bluetooth® deactivated on your mobile device? Check the settings. Activate Bluetooth®
if necessary. Check whether the Lenco PPR-100 appears in the list of detected devices. If
not, connect it with your mobile device again. Place the devices close together. Remove
any other radio communication devices from the surrounding area.
Is a password necessary for the playback device? Check the settings.
Problems/solutions
®
-compatible? Refer to the manual for your mobile device.
18
on the PPR-100 to resume playback.