Lenco PPR-100 Manual Del Usuario página 19

Reset
If Bluetooth® playback seems to lag, you can use the
reset function. The reset switch is located in the small
hole at the top of the appliance.
All settings and saved stations will remain on the
appliance.
Do not use the reset function if the device is working
properly.
 Take a thin implement (e.g. a straightened-out
paperclip) and use its blunt end to press the reset
button until you can feel it being pushed. The
appliance will then switch off.
 Press
to turn the appliance back on.
If the appliance is still not working properly, you can
restore its factory settings:
 Press and hold MODE for at least 8 seconds to
delete all of the programmed settings and saved
stations. The appliance will then switch off.
 Press
to switch the appliance back on.
19