DJI SPARK Guía De Usuario página 4

Mounting the Propeller Guards
Propeller guards with a white mark should be mounted onto marked motors, while unmarked
propeller guards should be mounted onto unmarked motors. DO NOT mix them up when
attaching.
Follow the steps below to mount the propeller guards correctly.
1. First, release the lock and attach the propeller guard from underneath the frame arm. Make
sure the attachment hole is securely wrapped around the motor. Next, twist the propeller
guard until the lock is wrapped around the frame arm securely.
2. Fasten the lock and listen for a click. When the click sounds that means it is locked securely.
Repeat steps 1 to 2 for the remaining frame arms.
Click
5